They are making a number of great pointers on the subject of How to Troubleshoot and Repair an Electric Water Heater overall in the article on the next paragraphs.
Many contemporary residences utilize an electrical hot water heater for their heating unit, as a result of its convenience as well as convenience of use. Nevertheless, similar to any other electrical home appliances, troubles may develop with its use, unexpectedly. It can be truly frustrating to wake up to a chilly shower rather than a warm one or having your bathroom with water that isn't hot sufficient and even also warm. Whatever the case may be, water heater issues can be fairly aggravating. Fortunately, we've made a listing of feasible options to your hot water heater concerns. There are a number of factors that might trigger much of these troubles, maybe an issue with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you shut off the primary power supply for safety and security. Whatever the trouble is, getting it dealt with should not pose too much of an issue if you follow these steps:
Call A Professional:
If after replacing all defective parts and also resetting your temperature level, the hot water heater still isn't functioning, you might require to speak to a specialist plumber for a specialist point of view. The trouble with your heating system could be that the cold and hot faucets have actually been changed or it might be undersized for the amount of hot water needed in your home. Whatever the case may be, a specialist plumber would certainly aid fix the issue.
Inspect Your Power Supply:
As fundamental as this may seem, it is very necessary. Without appropriate power, your hot water heater will certainly not function. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the issue, simply turn it off and on again. Change any kind of busted or damaged fuse. Examine the device with power after these adjustments to see if it's currently functioning.
Inspect Your Thermostat:
If your water heater still isn't working or the water coming out isn't hot sufficient, you might require to inspect the temperature settings on your upper thermostat. Ensure the breaker is turned off prior to doing anything. Open the access panel and press the red switch for temperature level reset over the thermostat. This must assist heat the water. Transform the circuit breaker back on and examine if the trouble has actually been fixed.
Check the Burner in the Hot Water Heater:
If it's not a power issue, then attempt looking into your burner if it is still working. Test each of your burner to make sure the issue isn't with any of them. If any one of them is malfunctioning, replace that component and afterwards check whether the warm water is back on.
Verdict
Water heater problems are not constantly major. A lot of them result from small issues like a blown fuse or damaged burner. Replacing the defective parts must work. However, if you are still not able to resolve the problem, give a call to your closest plumber ahead to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I came across that blog entry about What Would Cause My Electric Water Heater to Stop Working? while browsing the search engines. Sharing is caring. Who knows, you might be helping someone out. Many thanks for your time. Come back soon.
Click Here To Read More